N2XOH-PC 0,6/1 kV 3-1x240 mm2

Application

In low voltage power distribution networks. Special application in places with poor ventilation, direct application in places with public attendance high. It can be installed in ducts, ladders or cable trays, in dry, humid or wet environments.

STANDARDS

PRODUCT

NTP-IEC 60228; NTP-IEC 60502-1; IEC 60228; IEC 60502-1

TEST

IEC 60332-1-2; IEC 60332-3-24; IEC 60754-1; IEC 60754-2; IEC 61034-2; UL 2556

CONSTRUCTION

1. Conductor: Flexible soft copper.

2. Insulation: Cross linked polyethylene XLPE.

3. Outer sheath: Halogen free thermoplastic compound HFFR.

4. Tape: Polyester tape.

MAIN CHARACTERISTICS

The cable has excellent electric properties. The cross-linked polyethylene insulation allows a higher power capacity current under any operation conditions, lower dielectric losses, high insulation resistance.

The outer sheath has the following characteristics: Fire retardant, zero emission dense smoke and halogen free.

The new attributes of this product are:

Greater flexibility, helping in the installation and handling process, due to its new configuration of conductors and flexible raw materials for insulations and coating.

Greater protection to the external cover, against dragging during the process of installation on non-smooth surfaces, guaranteeing compliance with the thickness of the same.

CROSS SECTION

From 120 mm2 up to 500 mm2.

MARKING IN EACH PHASE

INDECO BY NEXANS N2XOH-PC 0,6/1 kV - Section - Year - (- sequential length m. || sequential length m. +).

PACKING

Non returnable wooden reels.

COLOUR

Insulation: Natural.

Outer sheath: Black, red and white or black, red and blue.

PRODUCT STANDARDS

NTP-IEC 60228:Conductors of insulated cables.

NTP-IEC 60502-1:Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.

IEC 60228:Conductors of insulated cables.

IEC 60502-1:Power cables with extruded insulation and their accessories for rated voltages from 1 kV and 3 kV.

TEST STANDARDS

IEC 60332-1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame.

IEC 60332-3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C.

IEC 60754-1: Test on gases evolved during combustion of materials from cables. Part 1: Determination of the halogen acid gas content.

IEC 60754-2: Test on gases evolved during combustion of materials from cables. Part 2: Determination of acidity (by pH measurement) and conductivity.

IEC 61034-2: Measurement of smoke density of cables burning under defined conditions.

UL 2556: Wire and Cable Test Methods. Section 9.3: FT1 (Vertical-Specimen) Flame Test.